DWCC stats from SouthEast Linux Fest

I deployed DWCC(https://github.com/zunder1990/Distributed-Wifi-Capability-Collector) for the first time at a large event. I was only able to get one node running, and was only able to capture packets on the following channels: 1,6,11,36,52,56,100,116. With one node running for two days and only capturing the management and control part of the wireless packets, I got 17gb of PCAPs.

Here are the results (only counting when client was talking with AP and not when client was probing broadcast):

2.4ghz clients204
5ghz clients90Note: I was only able capture a few of the 5ghz channels
802.11k clients110 Provides information to discover the best available access point
BSS Transition/802.11r/FT231Allows for faster roaming between APs
QOS map53RFC 8325 tells you if the client is able to set DSCP value on packets it sends
receive frames from mu-mimo AP31Says if client is able to receive packets send from AP while doing mu-mimo
receive frames from single user beamforming AP51Says if the client is able to understand an AP trying to beamform
Transmission of STBC-coded frames28Space-Time Block Coding (STBC) can be used when the number of radio chains exceeds the number of spatial streams.
Extended Channel Switching80Provides a mechanism for an access point to notify the stations connected to it of its intention to change channels or to change channel bandwidth.
Orthogonal Frequency-Division Multiplexing OFDM126
WNM-Sleep Mode45Power save mode
Multiple BSSID13Client can understand when one than one BSSID is in a beacon packet from an AP
802.11w40 Protected Management Frames 

interworking/802.11u
43Related to hotspot2.0

wnm notification
59Related to 802.11v

receive LDPC-encoded frames
51Clients able to understand frame encoded in low-density parity-check, related to Transmission of STBC-coded frames

Timing Measurement
9802.11mc, allows the client to tell how far it is from the AP,  3.3 nanoseconds per meter

SSID List
45